ON THIS WIKI
Balloon (Immersive Engineering)
| This article is a stub. You can help the wiki by expanding it. |
| Balloon | |
|---|---|
.png)
| |
|
| |
| Name | Balloon |
| Source Mod | Immersive Engineering |
| ID Name | ImmersiveEngineering:clothDevice
|
| Type | Block |
| Stackable | Yes (64) |
| Blast Resistance | 4.0 |
| Hardness | 0.8 |
| Solid | Yes |
| Transparent | No |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | Any tool |
Balloons are sacks of fabric with a heat source below to keep them afloat. They will also emit light, but despite the torch, they are not a fire hazard. Balloons can be placed like normal blocks, or, when no block is targeted, they will be placed in the air in front of you. Similar to the Structural Connectors, you can attach Hemp Rope and Steel Cable to the balloon. Sneak-rightclicking allows you to set a height offset for the balloon, allowing you to place it up to 5 blocks above the target.
You can also use dyes on a placed balloon: which part you dye depends on where you target it. Right-clicking with Engineer's Hammer will toggle the balloon's design between horizontal and vertical stripes.
Recipe[edit]
Usage[edit]
Balloon (Immersive Engineering) has no known uses in crafting.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Twitter Feed
Warning: file_get_contents(/srv/common/): failed to open stream: No such file or directory in /var/www/html/skins/MMWiki/SkinMMWiki.php on line 392
Discussion
