23,749 ARTICLES
ON THIS WIKI

Pump Module


This article is about Pump Module from GregTech 4. You may be looking for Pump from IndustrialCraft2 or Pump from BuildCraft.
Pump Module
Pump Module

Name Pump Module
Source Mod GregTech 4
ID Name Unknown
Type Machine Cover Plate
Stackable Yes (64)

The Pump Module is an item added by GregTech 4. It is used in some recipes and also as a cover.

If used as a cover it must be installed on a GregTech 4 machine side adjacent to a fluid tank and configured with a Screwdriver, cycling forward with right-clicking. The possible modes are:

  • Export - the machine will try to output fluids to the tank. If there is no tank the output will just drop to the ground.
  • Import - the machine will try to take fluids from the tank and put them into machine' input slots (if this is possible).
  • Export (Conditional) - the machine will try to output fluids to the tank. If there is no tank the output will just drop to the ground. Only works if machine is not disabled (with machine controller, soft mallet, etc.).
  • Import (Conditional) - the machine will try to take fluids from the tank and put them into machine' input slots (if this is possible). Only works if machine is not disabled (with machine controller, soft mallet, etc.).
  • Export (Invert Cond) - the machine will try to output fluids to the tank. If there is no tank the output will just drop to the ground. Only works if machine is disabled (with machine controller, soft mallet, etc.).
  • Import (Invert Cond) - the machine will try to take fluids from the tank and put them into machine' input slots (if this is possible). Only works if machine is disabled (with machine controller, soft mallet, etc.).
  • Export allow Input - works like Export, but will accept fluids if they're provided onto this side. Can be for example used to exchange fluids between machines.
  • Import allow Output - works like Import, but allows the machine to output fluids to that side (e.g., with item pipes).
  • Export allow Input (Conditional) - works like Export, but will accept fluids if they're provided onto this side. Can be for example used to exchange fluids between machines. Only works if machine is not disabled (with machine controller, soft mallet, etc.).
  • Import allow Output (Conditional) - works like Import, but allows the machine to output fluids to that side (e.g., with item pipes). Only works if machine is not disabled (with machine controller, soft mallet, etc.).
  • Export allow Input (Invert Cond) - works like Export, but will accept fluids if they're provided onto this side. Can be for example used to exchange fluids between machines. Only works if machine is disabled (with machine controller, soft mallet, etc.).
  • Import allow Output (Invert Cond) - works like Import, but allows the machine to output fluids to that side (e.g., with item pipes). Only works if machine is disabled (with machine controller, soft mallet, etc.).

Recipe[edit]

GUI GT4 Assembling Machine.png
Assembling Machine
Iron Plate (GregTech 4)
Iron Plate (GregTech 4)
Pump (IndustrialCraft 2)
Pump (IndustrialCraft 2)
Pump Module

EU: 12,800
Time: 40 secs
MaxEnergy: 16 EU/t

GUI GT4 Assembling Machine.png
Assembling Machine
Aluminium Plate (GregTech 4)
Aluminium Plate (GregTech 4)
Pump (IndustrialCraft 2)
Pump (IndustrialCraft 2)
Pump Module

EU: 12,800
Time: 40 secs
MaxEnergy: 16 EU/t


Usage[edit]

Pump Module can be used to create the following items: