24,538 ARTICLES
ON THIS WIKI

Alveary Fan


Alveary Fan
Alveary Fan

Name Alveary Fan
Source Mod Forestry
ID Name
Forestry:alveary:3
Type Block
Stackable Yes (64)
Blast Resistance 7.5
Hardness 1.0
Solid Yes
Transparent No
Affected by Gravity No
Emits Light No
Flammable No
Required Tool Any tool

The Alveary Fan can be part of the Alveary structure to simulate a cooler climate than the biome the Alveary is actually placed in. It needs a BuildCraft compatible power source to operate.

Using[edit]

A Fan takes a Variable amount of MJ ranging from 1 to 8 to move the temperature of the Alveary it is structured into down one. Example Normal/Normal to Cold/Normal.

Temperature Levels[edit]

Each tier of temperature you want to raise(or lower) your Alveary requires another Heater(Or fan) structured into the Alveary structure. For example from Cold/Normal you need one heater receiving 6-8MJ to reach Normal/Normal. Then moving from Normal/Normal to Warm/Normal you need a second heater connected to the structure with an additional 6-8MJ. Note that a single heater may not be able to receive 12-16MJ to accomplish this, one heater may be requiered per tier of temperature.

Limitations[edit]

Some areas appear to have limitations on the rise and fall of temperatures. Using only 1MJ on a fan to bring the nether Hellish/Arid brings it down to Warm/Arid however unlike above for some reason a single fan was able to bring it down from Hellish/Arid Two tiers lower to Normal/Arid. And unlike a test on overworld whos cooling limitation was Cold/Normal in the nether it was possible using enough MJ and fans to lower it to Icy/Arid. This shows a possible large variance in the biome on how it effects the uses of heaters and fans.

Recipe[edit]

GUI Crafting Table.png
Iron Ingot
Iron Ingot


Alveary


Iron Ingot
Golden Electron Tube
Iron Ingot
Alveary Fan

See Also[edit]

Alveary Spotlight[edit]