ON THIS WIKI
Pressure Regulator Tube
|Pressure Regulator Tube|
|Name||Pressure Regulator Tube|
|Source Mod||Pressure Regulator Tube|
A Pressure Regulator Tube is used to regulate the pressure in a PneumaticCraft system to a certain level. When the pressure on the input side exceeds the set pressure the tube will no longer transmit air and will limit the pressure on the output side to the set amount.
The allowed pressure is determined by a redstone signal applied to the tube. The required signal strength should be determined as:
SignalStrength = 15 - (2 x Pressure) where the pressure is in bar.
This tube can be used to supply a low pressure network from a higher pressure network.