ON THIS WIKI
Husher
Husher | |
---|---|
| |
Name | Husher |
Source Mod | Engineer's Toolbox |
ID Name | Unknown |
Type | Module |
Stackable | Yes (64) |
The Husher is a module added by Engineer's Toolbox that will mine blocks below the Modular Socket using Water or Slickwater. The Husher will take this fluid from one of the three internal tanks. The Husher will send its output to a Machine Output module if available, otherwise it will simply drop the output to the ground.
Contents
Recipe[edit]
Usage[edit]
Range[edit]
The default range of the Husher is a 3x3 square centred on the husher.
The range of the Husher can be configured through the use of a Range Selector module. When a white Remote signal is used on a Range Selector it will increase the Husher's operating radius.
Blocks Mined[edit]
By default, the Husher is capable of just mining any block softer than Stone.
In order to increase the mining ability of the Husher, a Pressurizer module can be installed. While the Pressurizer module is installed, the Husher will be capable of mining any blocks that are softer than Obsidian at a y-level of greater than 32. Using the Husher with the Pressurizer module installed will require 240 RF for each block mined.
If Slickwater is used instead of Water, the Husher will be capable of mining any block softer than Obsidian regardless of y-level.
If a Pressurizer and Slickwater are both used, the Husher will be able to mine any block at any y-level.
This is summarized in the following table:
Using Water | Using Slickwater | |
No Pressurizer | Any block softer than Stone | Any block softer than Obsidian |
Pressurizer Installed | Any block softer than Obsidian and above y-level 32. Uses 240RF/block. |
Any block at any y-level. Uses 240RF/block. |
|
Twitter Feed
Warning: file_get_contents(/srv/common/): failed to open stream: No such file or directory in /var/www/html/skins/MMWiki/SkinMMWiki.php on line 392